(RAL 7044) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7030) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7022) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7043) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 9005) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Thanks to treatment based on nanotechnologies, the POLARIS® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the POLARIS® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the POLARIS® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Components in wood (plywood, chipboard, MDF) or glass, in various thicknesses, liquid painted with an opaque effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Glass components, in various thicknesses, liquid painted with an metal effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Glass components, in various thicknesses, liquid painted with an metal effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.

Glass components, in various thicknesses, liquid painted with an metal effect. All the colors used for these lacquers have been specially chosen to match the RAL colors of the metal powder coatings.