Thanks to treatment based on nanotechnologies, the POLARIS® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

Thanks to treatment based on nanotechnologies, the FENIX® finish surface is scratch-resistant, soft to the touch and anti-fingerprint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 2 mm thick concrete surface is poured into the formwork and applied to the HPL, protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The surface is a 2 mm portion of “split” natural stone protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The surface is a 2 mm portion of “split” natural stone protected by a water-oil repellent treatment.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick natural wood surface is protected by scratch-resistant water-based paint.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick brass/stainless steel surface has a vintage manually brushed finish; the brass is protected by a film of beeswax.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 0.6 mm thick stainless steel surface has a vintage manually brushed finish.
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150° C) process.

The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.

The 2 mm thick eco-touch surface is a mixture of organic origin and 100% natural (cork, jute, linseed oil).
The HPL (high-pressure laminates) support is a panel made up of layers of cellulose fibres impregnated with thermosetting resins subjected to a high pressure (90 kg/cm2) and high temperature (150 ° C) process.

The concrete surface is protected by a water-oil repellent wax treatment.
The 8 mm compressed concrete sandwich is a panel made up of layers of plant-based fibres mixed with cement mortar subjected to a high pressure process.

The concrete surface is protected by a water-oil repellent wax treatment.
The 8 mm compressed concrete sandwich is a panel made up of layers of plant-based fibres mixed with cement mortar subjected to a high pressure process.

The concrete surface is protected by a water-oil repellent wax treatment.
The 8 mm compressed concrete sandwich is a panel made up of layers of plant-based fibres mixed with cement mortar subjected to a high pressure process.

(RAL 7044) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7030) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7022) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 7043) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 9005) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 6013) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.

(RAL 9005) Metal components (steel and aluminum) powder coated. Powder coating is used in the industrial production to coat metal surfaces for decorative and protective purposes. It consists in covering the surfaces with a homogeneous film of particles through electrostatic attraction and subsequently heating the component in order to melt and polymerize the powders. Compared to liquid painting, this type of processing has a higher mechanical and corrosion resistance, low flammability and high precision in application. The powder paints used are composed of pigments and thermosetting resins, totally non-toxic and solvent-free. For these reasons, powder coating can be considered an eco-friendly and low environmental impact process. All of our components, which are ordered for outdoor, undergo further processing of “cataphoresis” to increase their resistance to corrosion. Most of our colors are coded in the international RAL range, in order to help the designer in the combination with other products.